How To Clean And Store Sawyer Filter

Brandon has been working with range hoods and rang on and off for the by 6 years and writes well-nigh them to assist people make wise decisions.

Learn how to clean a metal mesh cooker hood filter. These article provides five solid DIY methods for getting the task done.

5 Reasons to Clean Your Range Hood Filters

Fifty-fifty though it may not seem like the best way to spend your time, you're going to want to brand sure that your range hood filters are maintained well. Acme manufacturers such as Broan recommend that yous clean the filters at least one time a calendar month.

That'south definitely a lot of cleaning if you're similar every regular homeowner. Virtually people take never cleaned their filters in years, some even a decade. But, being a self-proclaimed expert on range hoods, I must second what the guys at Broan are telling you. Consistent cleaning of your filters is necessary for the following reasons:

1. Improved ability efficiency
2. Longer life of the blower
3. Effective grease and smoke removal
4. Easier cleaning
5. Prophylactic

Regular Cleaning Makes Things Simple

Afterwards & before cleaning using just soapy h2o and ammonia.

Flickr Creative Commons

Tin can All Filters Be Cleaned?

In that location are basically three kinds of filters on most range hoods:

• Textile grease filters
• Metallic grease filters
• Charcoal filters

Grease filters, as the name suggests, have the sole purpose of filtering out oil fumes and grease. They are present in all range hoods with the exception of a few models in the past.

Fabric grease filters work past absorbing the fumes and grease (much like a sponge) and cannot exist cleaned but need to be replaced.

Metal grease filters tin and must be cleaned often. They are usually aluminum or in some cases stainless steel. They would be either mesh filters or bamboozle filters and are ordinarily visible at the base of your range hood.

Charcoal filters are only going to exist present in ductless models as their master purpose is the elimination of olfactory property and smoke. This is simply a necessary step if you're recirculating the air back into your kitchen. These filters must not and cannot be cleaned. Instead, they need to be replaced every three to four months, depending on how often and what kind of dishes yous fix.

How to Clean a Range Hood Filter in seven Unproblematic Steps

It may seem like a long process, but depending on how dirty your range hood filters are and the method you cull to follow, the full time could be anywhere upward to an 60 minutes, whereas the actual cleaning fourth dimension would exist beneath fifteen minutes.

1. Detach the metal grease filter(s)
2. Place the filter in a large pan/sink
3. Prepare the cleaning solution
4. Immerse the filters in the solution
5. Brush to remove the grease easily
6. Permit them air dry
7. Insert them dorsum into the range hood

Detaching the Filter to Be Cleaned

This is going to vary based on your model. However, in all models, the filters are very like shooting fish in a barrel to disassemble. But before y'all start fidgeting and trying to figure out how to carve up it from the remainder of your hood, make sure that you switch off the appliance.

Spend a moment to take a look at the overall setup of the range hood. Are your metallic filters clearly visible or are they by and large hidden? The outset stride is to brand certain that y'all have a clear view of the filters. Remove whatsoever protective plastic or metallic casing that surrounds the base of your hood using a screwdriver. In 95% of the cases, there isn't going to exist whatever protective casing.

Scroll to Go along

Read More From Dengarden

Once you lot have a clear view of the filters, you're going to want to detect out how they are connected to the rest of the appliance. You lot would discover either one of the post-obit:

• Screws hold them in identify and they need to be unscrewed.
• A T-Lock or like machinery holds them in identify.
• A metal/plastic fastener that needs to exist rotated to the side. (Video below)
• Easy to operate latch mechanism where you press on the lever and raise to detach. (Video below)
• Rim supports where you lot just need to push up and rotate to set the filter-free.

Fortunately, the most difficult type of zipper that you're going to come beyond is one with a combination of a support and a fastener. The only reason I say it's difficult is that at that place are models where the rotating flap is placed at such an bad-mannered position, you're going to find it difficult to get your fingers in place. Instead, you may have to use a spoon or a screwdriver to rotate it.

Preparing the Cleaning Solution and Cleaning the Filters

We're now going to be covering steps 3 through pace five of the cleaning process. There will be no clear distinction between the steps equally each of the 5 methods stands on its own and may skip certain steps.

Annotation: I will be proceeding with the virtually effective cleaning method to the least effective. This is done to save reading time and y'all would only proceed to another method if yous're out of stock on certain supplies and/or prefer another method due to simplicity.

Method 1: Using Dishwasher Detergent

Rather than using dish lather or a grease remover, yous're going to exist using dishwasher detergent to get the job washed.

1. Wet the filter with a blast hose or nether the tap (preferably with hot water as this gets rid of some grease).
2. Identify the wet filter in a pan or a sink (which is going to remain free for the next hour).
3. Generously utilize and spread dishwasher detergent all around the filter, including the metal rim if you want it to exist completely clean. Leave no surface untouched.
4. Let the filter sit for one hour.
5. Identify it in a sink under hot h2o and wash off the detergent along with the grease.
6. Apply more detergent and scrub using a brush to remove any modest traces of grease in the corners.
7. For extremely greasy filters y'all may have to echo the procedure and let it sit for some other hr.

Kitchen Exhaust Fan Filter Cleaning

Method two: Using a Degreaser

In that location's a lot of scrubbing involved in this method when compared to the get-go. It may not be as effective, just the filters do get make clean nonetheless.

1. Find a cooking pot that is large enough to hold the grease filter.
2. Make full it upwards with water so that the filter tin can be completely submerged (exercise not place the filter in the pot, withal).
3. Heat the water, but non enough to boil. Spray a lot of degreaser into this water. Around 20 sprays if there's a lot of grease that needs to be removed.
4. Place the filter and make sure that it is submerged. Do not let your blank easily touch this mixture as it is slightly acidic.
5. Leave the filter in the solution for xxx minutes up to an hr.
6. Remove the filter using tongs and identify it in the sink and scrub hard on both sides.

Method 3: Vinegar and Baking Soda Solution

As an culling to method 2, yous could also use a combination of vinegar and baking soda to go the task done.

1. Discover a pot big enough for the filter and sufficiently fill it up with water.
2. Bring the h2o to a boil.
3. In one case humid add 3 tablespoons of vinegar and 2 teaspoons of baking soda to the solution, i after another. Add together the blistering soda in slowly and not all in ane go.
4. Identify the filter and allow it stay for 30 minutes to an hour.
5. Remove the filter using tongs and place it in the sink and scrub hard on both sides.

Comparison: Method ii vs. Method 3

Method 4: Hot Soapy Water + Ammonia

If you lot've been following your cleaning schedule and cleaning every other month, this simple method using only soapy water and ammonia (not always necessary) is all you're going to need.

1. Block the kitchen sink and add h2o + dish soap. Y'all may as well want to add some ammonia to make the job easier.
2. Mix the solution and so place the filter in.
3. Use a castor and scrub on the filter.

Cleaning a Range Hood Filter the Broan NuTone Manner

Method 5: Placing in the Dishwasher

Most mod-day range hoods come with dishwasher-friendly aluminum or stainless steel grease filters. You're going to need to await at the production specifications to notice out if the filters are dishwasher friendly, alternatively, you could look upwards reviews of the product or contact customer support.

If your filters are dishwasher friendly, you should, by all means, make sure that you clean it every other month. Considering, if you do this consistently, you lot're not going to take to worry near scrubbing and using special solutions to make clean them.

All the same, if you've failed to regularly make clean them, your filters may take accumulated a lot of grease and dirt. In this example, just placing them in the dishwasher is not going to do much. You will instead have to follow 1 of the beginning iii methods explained above.

Air Drying and Reattachment

Since the filters are metallic, I would not recommend using a blow dryer every bit this could in unfortunate cases pb to electrical shocks. Therefore, the best thing that you could do is permit them to dry in fourth dimension. Before yous set them dorsum in identify, make certain that they are completely dry as you don't want the wiring of the range hood getting wet by any chance.

Dirty Range Hoods Can Be Dangerous

A dirty range hood doesn't only damage the range hood and increase your electricity pecker, it's also a health and fire take a chance.

Health Hazards

A dirty range hood is greasy, slimy and warm. This is an surround where some pathogens (leaner and the like) thrive. Also, the minor nutrient particles that are carried forth with the fumes and settle on the filters assist feed the growing bacteria.

Fire Hazards

The oil and grease deposits on your range hood, just above your cooktop are a fire take a chance waiting to happen. Information technology's non common that fires are acquired this mode, but at that place have been a few cases where uncontrolled flames on the stove have risen and ignited residues on the range hood filter.

Cleaning the Area Around the Filter

There are bound to be oil and grease deposits on certain parts of the range hood which are immediately above the cooktop and also around the grease filters. These areas tin can hands be cleaned using a balmy degreaser.

All you need to do is use a napkin, spray some degreaser and wipe abroad. Make sure that yous read the instructions before you spray, as some of them are concentrated and you need to mix with water before use.

This commodity is accurate and true to the best of the writer's knowledge. Content is for informational or amusement purposes only and does non substitute for personal counsel or professional person advice in business, financial, legal, or technical matters.

Questions & Answers

Question: Can I clean range hood filters in the dishwasher?

Reply: If the manufacturer says you can, then you could. If you lot don't take those details use your own judgment. Are there small parts that could be damaged? If yes, do non put it in the dishwasher.

Brandon Lobo (author) on September 03, 2018:

Hey Marian, cleaning the fan. Hmm, it really depends on your range hood model. I would most likely use a damp cloth, soaked in some cleaning solution to wipe the blades. I would also propose against getting any electrical components wet. Later cleaning the fan, equally a precaution, I would suggest that you lot do not turn on the range hood for at least a few hours, allowing any moisture on the electrical connections to dry out upward. Exercise come up dorsum and let me know how it goes and what yous decide to practice. I would love to add to this article, and I'g certain it would help many readers in the time to come.

Marian Laureta on September 03, 2018:

Hi Brandon: thanks for your awesome write up. Cleaning the filters are no problem. The question I take is: do you recommend cleaning the actual fan? I take had difficulty finding info on this.

Brandon Lobo (writer) on July thirty, 2018:

Hi Carl, thanks for sharing. Glad that yous managed to clean those filters.

Carl on July 29, 2018:

I cleaned my range hood filters terminal dark. They were very greasy. Start, I tried a stiff ammonia solution -- no practiced. Then I tried a strong dish detergent solution -- no good. Finally, I tried a strong dishwasher detergent and very hot water solution -- worked!

Brandon Lobo (author) on Apr 02, 2018:

Very truthful.

Linda Bryen from United Kingdom on April 02, 2018:

Howdy! Brandon, we do larn from each other hither on Hubpages. That is what I like most the website too. Besides many things to acquire and share. Thanks.

Brandon Lobo (author) on April 02, 2018:

How-do-you-do Linda, white malt vinegar on burnt stuff, I should attempt that out. I effort and utilize force or hot h2o to help. Thanks for the helpful tips.

Linda Bryen from United kingdom of great britain and northern ireland on April 02, 2018:

Hi! Brandon, what a well written and informative hub. Cheers. What I find best for cleaning cooker hoods is the vinegar and baking soda combination and fairy liquid just to terminate information technology off. Or sometimes I employ the white spirit they use for thinning pigment. I spray the cooker filter and exit information technology for an hr or then then I make clean it with fairy liquid. I tried degreaser products but they don't seem to work, also very expensive. Vinegar and baking soda is the best cleaning amanuensis for cooker filters I think, and not so expensive. I use white malt vinegar for burnt saucepans and baking trays. Only soak it with vinegar overnight and make clean it the side by side mean solar day. The burnt stuff comes off easily.

Bigtexun on March 10, 2018:

So I took a lot of chemestry in schoolhouse, and paid for that schooling with reseaurant work, including cleaning range hoods.

Don't dilute your degreaser if it comes in a spray canteen, it is already dilute. spritsing spray degreaser into a large corporeality of h2o is counterproductive. On the other hand, concentrated degreaser needs dilution with hot water to work. Industrial purple from Zep is similar to what the pros use.

If you use vinegar and baking soda, recall nearly what you are doing. Vinegar is an acid, baking soda is a base, they cancel each other out and produce co2 and table salt. co2 and table salt are not useful. Basking soda is expert to utilize dry or in paste form, for a variety of jobs. Vinegar is neat for other jobs, expecially descaling. Mixing them together is deactivating both. And so to follow the instructions here, what you are doing is cleaning the filters in a weak acis bath, that you lot make weaker as you lot add the baking soda. And in the process you are doing nothing for grease. Just considering grandma used information technology doesn't go far work. Gradma cleaned things by scrubbing and scrubbing, the baking soda and vinegar did not actually help, simply the hot water did, b ut grandma and dish lather did most of the actual work. The foaming action has the illusion of scrubbing bubbling... bubbles can help agitate, just they don't scrub and they don't really aid with /this/ task.

A stong alkali in humid water will work for a quality stainless alloy, turning the grease into lather, only that is dangerous for the skin and tin can produce fumes... Merely when grandma was serious virtually degreasing something hard to scrum, lye was her go-to degreaser... Plow that grease into soap then it simply dissolves in water. The alkali will destroy aluminum, so industrial blue degreaser is the best for aluminum. Grandma used lye for a lot of serious cleaning, but it is not safe, and so stick to the degreaser and dish lather.

If your sink is large enough to soak the filters, a good automated dishwasher detergent is also adept, this is what I apply at abode when I don't have industrial purple.Automatic dishwashing powder is great for soaking, and will assist loosen and lift the soiled grease out of difficult to scrub areas.

blistering soda and vinegar together are for leavening old fashioned from-scratch cakes... THAT is where vinegar and baking soda chemistry really does more than make a salt.

Brandon Lobo (author) on March x, 2018:

Hi Colleen, maybe try finding something that fits in to those knob holes perfectly so that you take some leverage to get them out? Yous're going to take to improvise with something at home. Good luck.

Colleen on March 04, 2018:

Hi Brandon

I have a Faber hood with baffle filters. They are not installed properly so the knobs to remove baffles are non at that place. Is there a tool I can use to pull the baffle back enough to remove it! There are holes for the knobs merely no knobs! Please help if u can!

,

Brandon Lobo (writer) on January 28, 2018:

Thank you for this comment iSky, there was someone who was complaining that this is confronting high school chemistry, mixing an acrid and a base. It works, the mixture of vinegar and baking soda.

iSky on January 28, 2018:

My filter was horrible. I soaked it overnight showtime using dish lather. Then for an hour with dishwasher soap. It was very clean but had a couple spots. Then used the vinegar and blistering soda method. Came out sparkling clean.

Neil from SHEFFIELD on December 13, 2017:

In near cases I find the dishwasher works great for cleaning these extractor filters, just make sure they are fully dry before re-fitting otherwise corrosion can appear.

Source: https://dengarden.com/cleaning/how-to-clean-range-hood-filters-5-easy-methods

Posted by: bloomyouris.blogspot.com

Share this post